Thermite Weld for CWR, weld mold is fastened over the joint to be welded using clamps
Paul Horst & Mark Gillings |
Thermite Weld for CWR, The preheat reaction is started with a torch
Paul Horst & Mark Gillings |
Thermite Weld for CWR, Crucible with melted steel fills the gap between rails to weld rails
Paul Horst & Mark Gillings |
Thermite Weld for CWR, debris is shaved while still hot with hydraulic press
Paul Horst & Mark Gillings |
Thermite Weld for CWR, wheel mounted pneumatic grinder surfaces the rail
Paul Horst & Mark Gillings |
CP Teleweld Heater for Continuous Weld Track #2017T3
Joe Blizman
|
CP Teleweld Heater for Continuous Weld Track #2017T3, vibrators that rest on the track to help the rail grow as it's heated
Joe Blizman
|
BNSF primary rail heater #X8200040, hydraulic motors on pads are vibrators that rest on the track to help the rail grow as it's heated
Paul Horst & Mark Gillings |
BNSF aux heater #X8200040, used if it's too cold
Paul Horst & Mark Gillings |
BNSF Rail Heater , Glen Haven, WI 2006
Norman R. Cross |
MBTA rail heater, Hingham MA 2007
Jack Clifford |
UP continuous weld before grinding
D.L. Owings |
UP continuous weld
D.L. Owings |
CWR Teleweld Heater for Continuous Weld Track
Tom Daspit |
UP CWR heater #GTW14000
Kevin Kuehl |
RBMN Teleweld Heater for Continuous Weld Track, Mountaintop, PA
Laura Chamberlin |
Welder for Continuous Weld Track
Tom Daspit |
Caltran Joint Power Board Flats with Continuous rail section
Tom Daspit |
BN Continuous Rail Welder
©Michael Daly |
Continuous Welded Rail placement
Harold Riley
|
ATSF continuous weld #187973, guides rail to ground, 2002
Wayne Buser |
ATSF continuous weld #187972, moves the rails to the side of the car, 2002
Wayne Buser |
ATSF continuous weld #187197, guides the rail along, 2002
Wayne Buser |
ATSF continuous weld #187086, guides the rails out of the racks, 2002
Wayne Buser |
ATSF continuous weld rail #187509-187578-187583, 2002
Wayne Buser |
ATSF continuous weld #187970, welder unit and rail puller unit, 2002
Wayne Buser |
BN cont weld #961481, Willmar MN 2003
Doug Johnson |
NW continous rail #516920, Roanoke, VA 1984
Mike Castellow |
CR GP40-2 Welded Rail Pt Byron NY #3283
Brendan Kelly |
CR Continuous Rail Unloader Pt Byron NY
Brendan Kelly |
UP pettibone dragging continuous rail
D.L. Owings |
UP crane lifting continuous rail #RTR58D
D.L. Owings |
UP continuous rail cutter
D.L. Owings |
Holland welder
D.L. Owings |
Holland weld head
D.L. Owings |
Holland welder #FWX203
©Charles Tripani-GS |
Holland mobile welder #252, Ottawa, PA 1990
Jim Appleman |
Lifting, removing & cutting old rail | INFO
CS |
SSW Plasser Butt Welder #K355 | INFO
Jolly Goodfellow |
Plasser K355-SSW welder , SP (UP) Anderson CA 02
Ken Harrison |
Plasser K355-SSW welder , SP (UP) Anderson CA 02
Ken Harrison |
UP Plasser American APT-500-S/100 welder #ITW-0101, Dixon, IL 2005
Wesley Fane |
Plasser-American In-Track Production Welder #9901
Ken Jamin |
Plasser-American In-Track Production Welder #500-S
Ken Jamin |
Plasser-American In-Track Production Welder #500-S
Ken Jamin |
Plasser-American In-Track Production Welder #9901
Ken Jamin |
Plasser-American In-Track Production Welder #9901
Ken Jamin |
Plasser American APT-500-S/100 #ITW-0401, 2005, blt 1990, rblt 2005
Patrick A. Ward |
RJ Corman welder, Hi-Nella, NJ 2002
Bob Vogel |
RJ Corman welder annealer, Hi-Nella, NJ 2002
Bob Vogel |
RJ Corman rail cutter, Hi-Nella, NJ 2002
Bob Vogel |
Rail Cutter, Bowling Green KY 2006
Steve Junas |
Rail Cutter, Bowling Green KY 2006
Steve Junas |
RJ Corman hand grinder, Hi-Nella, NJ 2002
Bob Vogel |
Holland Co rail welder, Danville IL 1972 ex ATSF90 RPO
|
Holland rail welding car #101, Burns Harbor, IN 1977
Tim Vermande |
